Current Location:Product Product

Plastic to Diesel Plant

Time:2019-01-02 15:53:16Author:admin Click:123
Waste plastic to diesel plant emerges in the market in a right moment because it is a good way to recycle plastic waste and then avoid overdeveloping of limited petroleum resources. Most of the diesel fuel in the market is extracted from petroleum. A
Plastic to Diesel Plant

Waste plastic to diesel plant emerges in the market in a right moment because it is a good way to recycle plastic waste and then avoid overdeveloping of limited petroleum resources. Most of the diesel fuel in the market is extracted from petroleum. As an important fuel oil with high efficiency, diesel is widely used in large and heavy machinery and vehicles like trains, tank, and tractor, etc. But for the limitation of petroleum resources of the world, diesel fuel looks not that sustainable as we thought. Therefore, turning plastic into diesel seems to a perfect way to save our energy and recycle annoying plastic waste.


Our plastic to diesel plant for sale recycles waste plastic into diesel oil and carbon black through the process of pyrolysis. Technically, we use auto-welding to make sure the quality of the plant. We also have several original designs and they can save energy and cost for our clients, i.e.

1. New heating structure combines the advantages of direct and open flame heating and indirect wind-type heating to improve heating efficiency and reduce fuel consumption.

2. We add refractory material between pyrolysis reactor and the casing. It can prevent aging of the reactor and avoid heat loss.

3. Rotary condenser enlarges the condensing area of the oil gas, accelerates the process of plastic to diesel and improve the oil yield. It is also more convenient for maintenance than the old type condensers.

4. The PLC computer control system is very easy to operate and it also provides three levels of operation. The clients can make choice according to their budget and actual needs.

Aside from that, Plastic to diesel converter has the following advantages,

1. High-performance cost ratio: our waste plastic to diesel plant cost is low but the quality is high. We have a precise production line for every part of our plants.

2. Profitable: the raw material of the plant is easy to gather and low in price, and the clients can get considerable profits from the end products of this plant.

3. Environment-friendly: the whole working process of our waste plastic to fuel conversion plant is green and safe. We make sure to filter and remove the sulfur of the smoke before discharging it.

Wide Usage of the End Products of Plastic to Diesel Plant

End Products


Pyrolysis Oil

sell and use   it directly as fuel oil

reprocess   by oil distillation plant and get   qualified diesel fuel at last. The qualified diesel fuel can be used for   heavy machinery or generating electricity

Carbon Black

sell it   directly

coarse carbon   black can be grinded and reach to the standard of Carbon Black N330

Note: different size of carbon black has different uses, for more information about this, you can check the page of our carbon black grinder.

Working Flow of Beston Waste Plastic to Diesel Machine

1. Loading waste plastic to the auto screw feeder and the feeder starts feeding the plastic into the pyrolysis reactor.

2. Heating the reactor to the relevant degree and then oil gas will be generated and go to the oil gas manifold. The heavy particles of the oil gas will be liquefied into heavy oil and reserved in heavy oil tank; the light oil gas will rise up to the condenser and liquefied into light oil. The light oil will also be reserved.

3. There will be combustible gas during the pyrolysis process. In the hydroseal, the combustible gas will be cleansed and the sulfur in the gas will be removed. After cleaning, the gas will be used as fuel to heat the pyrolysis reactor.

4. The smoke generated during the heating will also be filtered and cleaned and then discharged safely, meeting the EU Environment Emission Standards.

5. Carbon black will be discharged through the auto screw discharger.

6. The light oil can be processed in a waste oil distillation machine. Finally, you can get qualified diesel oil from waste plastic.

Specification and Parameters of  Waste Plastic to Diesel Oil Plant








Daily Capacity





Working Method



Fully   Continuous

Raw Materials

Waste Plastic,   Tyre, Rubber, Oil Sludge, Medical Waste

Reactor Size






Horizontal   & Rotary

Heating   Materials

Charcoal,   Wood, Fuel Oil, Natural Gas, LPG, etc.

Total Power





Floor Area   (L*W*H)





Operating   Pressure

Normal   Pressure

Constant   Pressure

Cooling Method

Water Cooling

Service Life

5-8 Years

Besides, our pyrolysis plant cannot only accept waste plastic as the raw material. Waste tyres, rubber, medical waste and oil sludge can be also turned into diesel by this plant. The density of the diesel refining from waste plastic is 0.80±0.02 and the combustion value is 8500 calories. The density of diesel refining from waste tyre or rubber is 0.90±0.02 and the combustion value is 10500 calories to 10100 calories.